• RTT 10E4 - 10E6 ohms per ESD-S7.1
  
  • Conductive - able to remove electrostatic charges to ground
  • Exceeds ANSI/ESD S20.20 minimum recommended technical requirements of < 1 x 10E9 ohms for ESD Protected Flooring and suitable for ESD protective flooring
  • Can be component in Flooring - Footwear System as primary grounding method (<3.5 x 10E7ohms per ESD STM 97.1)
• Areas greater than 20 square feet do not require expensive grounding grids or wires; Static Charge Decay: dissipates 5000 volts to zero in <0.01 sec per FTMS 101C/4046
  Can replace ESD floor mats in electronics, manufacturing, assembly, and test areas protecting ESD susceptible items
• Adheres to floors, walls, or wood furniture
  Provides ESD protective surface on concrete and epoxy floors and in places which are difficult to protect
• Excellent wear and durability
  Excellent value providing long-life
• Apply via rolling or spraying
  Productive application and maintenance; easy cleanup
• Two colors to choose from
  Grey hides dirt better in most applications; Light Grey brightens up factory area
• RTT: 10E4 - 10E6 ohms per ESD S7.1 @ 50% R.H.
• Coverage: 300-400 sq. ft/gallon
  Excellent value
• This product has been certified to meet the RoHS requirement.
• Lead-free RoHS compliant
• Contact Customer Service to purchase the item.
• Made in America

Note: ESD protected flooring requires a path-to-ground from carts or equipment & ESD footwear on personnel to remove electrostatic charges.