|
- Non-corrosive
- Absence of shed, crack, chip, or rub off
- Covers external plugs, holes, or connector pins on electronic chassis (black boxes, etc.) during transportation or storage
- Secure (bundle) IC tubes
- When using grounded Tape Dispenser, voltage generated by unrolling will effectively be reduced to zero
- Use in areas where the generation of static electricity is of concern
- For applications requiring EMI shielding
- Both surfaces non-tribocharging at 50% RH
- Thickness
1.9 mil (0.049 mm)
- Adhesive
Acrylic based
- Conductive grid layer (50% RH)
10E4 to 10E5 Ohms
- Adhesive copolymer resistivity
10E9 Ohms
- Copolymer layer resistivity
10E12 Ohms
- Max Temperature
140°F (60°C)
- Made in America
ANSI/ESD S20.20 requires that all nonessential insulators, such as those made of plastics and paper, must be removed from the workstation. Substituting antistatic tape for regular tape (a very high tribocharging insulator) protects your ESD susceptible products.
The user must determine the suitability for use of an antistatic tape for particular applications, and should reevaluate suitability one year after purchase date.
Note: Tapes store best when laid flat in a dry, well ventilated room with a reasonably consistent temperature of 20° C (68° F) and are protected from exposure to direct sunlight.
|
|