Desco logo - click to return to home page

Manufacturer of ESD Static Control Products

Full Catalog > Packaging > ESD Bags > Statshield® Transparent Metal In Standard ESD Shielding Bags > Statshield® Transparent Metal In Standard ESD Shielding Bags without Zipper >


13424 - Statshield® Metal-In Static Shield Bag, 102mm x 660mm, 100 EA

This item is built-to-order. A minimum order of 10 is required if there is no stock currently on hand. Lead times are typically 6-8 weeks.

Stock: 0


Sold Per: EA

Estimated Shipping Weight: 1.25 kg



Bookmark and Share
  • Most commonly used shielding bag
    High volume manufacturing provides value for the customer
  • 40% light transmission
    Allows for easy identification of bag contents
  • Integral antistatic, low tribocharging properties
    Bag contents will not electrostatically charge during movement
  • Integral static dissipative properties
    Not topically treated, not humidity dependant, won't wear off
  • Manufactured on specially designed soft fold converting machines
    Prevents scratches and creases maintaining the integrity of Faraday Cage shielding protection
  • Large 3/8" wide seals - high performance interior sealing layer
    Greater sealing surface provides greater seal strength compared to comparable products with 1/8" wide seals; higher quality, more durable
  • Identified with ESD Protective Symbol as required by ANSI/ESD S541 with lot code #.
    Improved quality control tracking and identified as ESD packaging.
  • Polycarbonate compatible containing no amines or N-octanic acid
    Non-corrosive, will not contaminate parts
  • Testable to industry standards
    Meets or exceeds one or more of the following standards: electrical and physical requirements of ANSI/ESD S20.20, EIA 541, EIA 625, MIL-STD-1686, and EIA 583
  • Heat sealable
  • Made in the United States of America

Sold in packages of 100 bags packaged in a protective oversized ESD bag.

Resistance of outer surface: <1 x 1011 ohms per ANSI/ESD S11.11
Resistance of metal layer: <10E2 ohms per ANSI/ESD S11.11
Resistance of inner surface: <1 x 1011 ohms per ANSI/ESD S11.11
Thickness: 3.0 mil

Technical Requirements and Guidance
“ESD protective packaging shall be in accordance with the contract, purchase order, drawing or other documentation. When not specified by the above documentation, the organization shall define ESD protective packaging requirements, both inside and outside the EPA per ANSI/ESD S541.”  [ANSI/ESD S20.20-2007 section 8.4]

Show more details...
Hide details...
  • TB-7057 - Requirements for Statshield ESD Bag Storage
  • 13405 - Statshield® Metal In Shielding Bags