|
- New 2 Meg Resistor – Added Operator Safety ensuring a minimum of 1meg-ground resistance
- New 3 point hook and loop fastening system – greater durability, comfort, ease of installation
- Improved design ensures maximum contact area, for superior grounding effectiveness
- UL listed for added safety
- Date coded; providing traceability for quality control
- Made in America
“For standing operations, personnel shall be grounded via a wrist strap system or by a flooring/footwear system.” (ANSI/ESDS20.20-2007 section 8.2)
Suitable for ESD footwear component in Flooring - Footwear System as primary grounding method <3.5 x 10E7ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance in Combination with a Person.
“Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functionality before reentry to the ESD protected area should be considered.” (ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance)
|
|