Desco logo - click to return to home page

Manufacturer of ESD Static Control Products

Full Catalog > Test Equipment > Test and Measurement Equipment > Digital Static Field Meter and Ionization Test Kit >

19440-TEST KIT UPGRADE, PORTABLE, FOR IONIZERS

19440 - Portable Test Kit Upgrade for Ionizers


1 In Stock.

Stock Location: YACHIMATA CITY, CHIBA

Sold Per: EA

Estimated Shipping Weight: 0.77 kg

Quantity:


 



Bookmark and Share
  • Portable tool to test ionizers per ANSI/ESD SP3.3 
    (19492 Digital Static Field Meter required)
  • Charger applies charge to conductive plate
    Installed on Digital Static Field Meter per ANSI/ESD TR53
  • Pair with the Digital Static Fieldmeter
    To provide a cost effective way of verifying ionization equipment offset voltage (balance) and discharge times and
  • Economical option
    When the Charged Plate Analyzer testing per ANSI/ESD STM 3.1 is not required 
  • Battery operated
  • Monitoring and control instruments out of the scope of RoHS
  • NIST Calibrated
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.  For more information on calibration of Desco products, see Calibration
  • Made in the United States of America

The Ionization Test Kit isolates the conductive Plate and positions it 1” away from the end of the Digital Static Field Meter. The battery operated Charger then allows one to quickly place a +/-1,000 volt charge on the Plate which since it is isolated will remain there for some time. The Periodic Verification of Air Ionizers test in accordance with ESD-SP3.3 is to place the Kit in the Ionizer’s airflow and use a stopwatch to measure the discharge times to reduce a 1,000 volt charge to 100 volts and to reduce a -1,000 volt charge to -100 volts. With the Kit grounded, it can then approximate offset voltage (balance).

“Air ionizers Compliance Verification ESD SP3.3, Periodic Verification of Air Ionizers. Objective, The objective of this periodic test procedure is to verify that the discharge time and offset voltage (ion balance) of air ionizers is in compliance with the user's specification. Measurements should be made at the location where ESD sensitive items are to be ionized.” (ESD TR53 Compliance Verification of ESD Protective Equipment and Materials)

Show more details...
Hide details...
  • TB-3041 - Ionization Test Kit: Operation and Maintenance