SmartLog Pro®

ESD Results at Your Fingertips

MEASURE → CONTROL → VERIFY

Technical Information        Online Demo Request

The SmartLog Pro® verifies the functionality of an operator’s wrist strap and footwear, logs the test results, and controls access to an ESD Protected Area.

All operator test activity is logged into a database to meet the ANSI/ESD S20.20 requirement for “Compliance verification records shall be established and maintained” and for on-going quality control purposes.

Each log entry includes operator identification, test results, resistance measurements, time, temperature and humidity.

Operator identification and access control is performed using the embedded HID OMNIKEY^® proximity reader, barcode reader or touchscreen keypad.

Access control to an ESD Protected Area can be further enforced by using the relay terminal on the SmartLog Pro®. It can be connected to an electronic door lock or turnstile to grant access only to those who have passed their pre-defined ESD tests.

SmartLog Pro® System

Eliminates Paper Logs Paperless data can enhance operator accountability, immediately identifying problems while reducing logging and auditing costs. Paper log systems can initially be effective but have proven to be inaccurate and ignored over time. Paper log systems are also limited to what information is documented and poses the following questions: Do your paper logs show any failures? How many failed tests were conducted prior to the written passed result?

SmartLog Pro® User Interface Offers 3 Ways to Identify Yourself Proximity Reader Embedded HID OMNIKEY Proximity reader iCLASS® and HID Prox® ready Programmable with most proximity badge formats

Barcode Scanner Embedded CCD Barcode scanner Reads code 39 and 128 Programmable with most barcode badge symbologies

Keypad 9 digit numeric keypad Alternative operator identification if barcode/proximity card is misplaced Can be disabled to enforce Barcode/Proximity scanning

Testing Features

• Simultaneous testing of the worn wrist strap and foot grounders in less than 2 seconds
• Records results for each foot grounder and each conductor in single-wire and dual-wire wrist straps
• Digitally programmable test limits
• Compatible with EMIT 50755 ESD Glove Test Fixture for testing ESD gloves and finger cots
• Dual foot plate design independently tests each foot grounder
• ESD garments may be tested using the wrist strap jacks

SmartLog Pro® Touchscreen User Interface Test Operator name Test requirement Test requirement symbol Resistance Measurement Records measurements of each conductor in single-wire and dual-wire wrist straps Records measurements of each foot grounder Visual and Audible Test Results Green signifies PASS conditions and red signifies FAIL conditions Unique audible tones for PASS and FAIL Temperature and Relative Humidity Measurements are sampled every 5 minutes and displayed on the status bar Values are captured with every completed ESD test

Two Embedded Output Relay Terminals

• Pairs with a turnstile, automatic door or other locking system to control access to ESD Protected Areas
• Click HERE for the complete turnstile offering