|
- Accurately measures RTT, RTG, or Resistivity for quick checks, factory audits, or test lab evaluation of product
Versatile tool measuring surface resistance as exponent number illuminates immediately, but designed to measure for full 15 second electrification period and exceeds accuracy requirements of ESD S4.1
- Meter measures ambient temperature and relative humidity
Available when required for test records
- Color coded LED and digital LCD read-out
Easy to read, no interpretation needed; can easily be used for quick go/no go checks
- Automatic Test Range Voltage Selection
In accordance with ESD Association standard, meter will test at 10 volts and automatically switch to 100 volts if over 105 ohms
- Surface resistance exponent always displayed if test button is depressed
Quickly and continuously provides exponent of resistance measurement which is often all that is required for quick checks or factory periodic tests
- LED identifies function and type of measurement displayed by LCD
Over electrification period cycles through temperature in °F then °C, then Relative Humidity, and then mantissa of resistance
- Portable operating on just two alkaline AA batteries
Very versatile requiring no plugging in or sourcing special batteries
- 1____ on the LCD displays indicates Overrange
Quickly identify insulative surfaces as the reading exceeds the display capabilities
- Flashing LED warns when battery is low
Alerts you when batteries need changing
- 10 Volt button feature
Can override automatic voltage selection and perform test at 10 V
- Test Kit includes set of Five Pound Electrodes and Leads, but the replacement items can be purchased
Electrodes and leads more likely to be damaged and need replacement; if this occurs no need to purchase entire Test Kit
- Made in America
Meter Weight: 15.5 oz.
Dimensions: 8" L x 4.3" W x 1.6" H
Power Supply: Two AA alkaline batteries
Per ANSI/ESD S20.20, test equipment is required to enact Compliance Verification Plan Requirement - "Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan."
|
|