• Dual test circuits
  Versatile, can test footwear or wrist straps
• Positive rocker switch actuation
  Reliably changes test mode
• Redesigned test button
  Rugged and reliable operation
• LED's display test results
  Simple operation with clear test results
• Red light and audible alarm
  Indicates that circuit resistance is too high or too low
• Battery powered with low-battery indicator
  Provides early warning to replace battery
• Optional AC adapter
  Versatile - can use line AC if preferred
• Base plate features conductive matting
  Provides high durability - no dings, scratches, etc.
  Provides accuracy - electrical properties closely match those of flooring surfaces found in production area
  Hides dirt and marks
  Two pounds lighter than previous stainless steel version
• Provided with calibration to NIST traceable standards; calibration unit available for users to maintain NIST calibration at their facility
  Simple means to assure accurate performance Lower calibration life cycle costs
• Made in America

“Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functionality before reentry to the ESD protected area should be considered.” (ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance)

“A log should be maintained which verifies that personnel have tested their personal grounding devices.” (ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding Guidance)

“Frequency of Functional Testing: The wrist strap system should be tested daily to ensure proper electrical value. Nominally, the upper resistance reading should be < or = 10 megohms or a user-defined value.” (ANSI/ESD S1.1-2006 Annex A3)