Manufacturer of ESD Static Control Products
000 Checkout

Added to your cart

You do not have any items in your shopping cart at this time.
View All cart items

66081-ROLL, STATFREE T2, RUBBER, DRK BLUE, 1.5 MM x 610 MM x 12.2 M

66081 - Statfree T2™ Dissipative Dual Layer Rubber Roll, 1.5mm x 610mm x 12.2m, Dark Blue



This item is built-to-order. A minimum order of 1 is required if there is no stock currently on hand. Lead times are typically 6-8 weeks.

Quantity in Stock: 0

Stock Location: YACHIMATA CITY, CHIBA

Sold Per: EA

Estimated Shipping Weight: 15.68 kg

Quantity:


 



Bookmark and Share
 
  • Durable rubber material, dissipative on one side and conductive on the other
    Versatile and long-lasting product; use as a dissipative worksurface table mat. Bottom conductive layer provides reliable path to ground, compatible for use with continuous monitors
  • Dissipative worksurface - 1 x 106 to < 1 x 109 ohms RTT
    Slows charge removal; meets minimum recommended worksurface requirements of ANSI/ESD S20.20 and recommendations of ESD 4.1
  • Lightly embossed surface
    Easier to clean than vinyl mats; excellent coefficient friction for handling electronic products
  • 100% Premium Nitrile Butadiene Rubber
    Excellent value providing long-lasting, good-looking life; consistent electrical properties; will never delaminate; can also be taped or glued down
  • Superior heat, chemical and wear resistance
    Excellent choice in soldering and other challenging manufacturing environments.
    Click Here for Chemical Resistance Chart
  • Top of mat kits laser engraved with ESD protective symbol & manufacturer
    Identifies ESD protective product for control & auditing purposes
  • Non-humidity dependence
    Provides consistent electrical performance regardless of ambient humidity
  • Lead-free RoHS compliant
  • Superior limited lifetime warranty
    Electricals guaranteed for the life of the mat
  • Grounding Hardware not included
  • Made in the United States of America
    • RTT: 10E6 - 10E8 (Dissipative Side) and <10E4 (Conductive Side) Ohms per ESD S4.1
      RTG: 10E6 - 10E8 (Dissipative Side) and <10E4 (Conductive Side) Ohms per ESD S4.1
      Thickness: 0.060" (1.5mm)


      Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).

      Show more details...
      Hide details...
      • TB-2000 - Installation and Maintenance of ESD Protective Worksurfaces
      • PM-104 - Statfree T2 Material
      • TB-7017 - MSDS, STATFREE T2™ DISSIPATIVE DUAL LAYER RUBBER