Desco logo - click to return to home page

Manufacturer of ESD Static Control Products

Full Catalog > Worksurface Mats and Grounding Hardware > Worksurface Mat Materials > Statfree T2 Plus™ Dissipative Dual Layer Rubber > Statfree T2 Plus™ Mat Rolls > Blue Rolls >

66400-ROLL, STATFREE T2 PLUS RUBBER, DISSIPATIVE,  BLUE, 1.5 MM x 600 MM x 12.2 M

66400-ROLL, STATFREE T2 PLUS RUBBER, DISSIPATIVE,  BLUE, 1.5 MM x 600 MM x 12.2 M              

66400 - T2 Plus™ Dissipative Roll, Blue, 1.5 mm x 600 mm x 12.2 m



This item is built-to-order. A minimum order of 1 is required if there is no stock currently on hand. Lead times are typically 6-8 weeks.

Stock: 0

Stock Location: YACHIMATA CITY, CHIBA

Sold Per: RL

Estimated Shipping Weight: 14.97 kg

Quantity:


 



Bookmark and Share
  • Dissipative Dual Layer ESD Worksurface
    Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface1.
  • NEW Nitrile Rubber Oil Resistant Compound
    Improved material compound limits oil absorption to improve electrical and physical properties through the lifespan of the material. May be used in soldering applications with flux and other chemicals. Click Here for Chemical Resistance Chart
  • Dissipative (1 x 106 to <1 x 109 ohms Rtt) Top Layer - Limited Lifetime Warranty
    Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items.
  • Conductive (<1 x 106 Rtt) Bottom Layer - Limited Lifetime Warranty
    Reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the material to be used with ESD workstation monitors.
  • Ultraviolet (UV) Stabilizer Additives
    Stabilizes color retention, ensures ESD performance over time and eliminates surface layer deterioration resulting in cracking when the product is flexed.
  • Laser Engraved With ESD Protective Symbol, Specs, and Manufacturer Information2
    Identifies ESD protective product for control & auditing purposes.
  • Lead-free RoHS compliant
  • Made in the United States of America

    1. Worksurfaces mats must be properly grounded to remove ESD charges.
    2. Additional lot coding information is marked on the bottom (black conductive) side of the material.
Show more details...
Hide details...
  • TB-2000 - Installation and Maintenance of ESD (Electrostatic Discharge) Protective Worksurfaces
  • PM-132 - Statfree T2 Plus Material