New Product
24” Chargebuster
Overhead Ionizer
• Two Fans with Steady State DC Ionization For
2’ X 4’ Coverage Area
Specially designed fan modules create better
coverage (2’ x 4’), consistent offset voltage
(balance) ±10 Volts, and superior discharge
times(<3 seconds) tested per ANSI/ESD STM 3.1
• Airflow of Fans: 99.9CFM
• Fan Noise: 45.5 dB(A) @ 1 Meter
• Auto-Feedback System (Audible And Visual
Alarm Through Single Tri-Color LED)
Unit will automatically shut down and alarm if/when
supply voltage drops
• 120/220 VAC Input Voltage Selectable
Unit can be used with 110V or 220V power sources
• 3 Position Fan Speed: Low, Medium, High
Ionization performance is consistent at all speeds
and allows for use with sensitive applications, such
as calibration, test, or repair procedures
• Replaceable Emitter Pins
Field replaceable emitter pins allow for minimal
downtime
• Made in America
“In order to mitigate field-induced CDM [Charged Device Model] damage, the ESD program shall include a plan for the handling of process-required insulators. If the field exceeds 2,000 volts/inch, steps shall be taken to either: A) Separate the insulator from the ESD-sensitive device by a distance of 30 cm (12 inches); or B) Use ionization or other charge mitigating techniques to neutralize the charge.” (ANSI/ESDS20.20-2007 section 8.3)

“All ionization devices will require periodic maintenance for proper operation. Maintenance intervals for ionizers vary widely depending on the type of ionization equipment and use environment. Critical clean room uses will generally require more frequent attention. It is important to set-up a routine schedule for ionizer service. Routine service is typically required to meet quality audit requirements.” (ESD Handbook TR 20.20 section 5.3.6.7 Maintenance / Cleaning)
Item Description
60640 24” Chargebuster Overhead Ionizer, 2-Fan, 120VAC, US Plug
Click here for a list of Distributors
and Sales Reps.		 Products & programs are available through your participating distributor. Click Here to Request a Demonstration Depend on Desco Asia
for scalable solutions.
Click HERE to ask an
ESD question.
If you would rather not receive these emails: please Click Here

If you are having trouble with the unsubscribe feature, e-mail DescoAsia@StaticExperts.com
DescoAsia.com