• Southeast Asian Outlet Monitor (Type G Plug)
  Monitors proper AC outlet wiring and meets the ANSI/ESD S6.1 requirement for verifying wiring orientation
• Six Banana Jacks and Six Screws for #8 Ring Terminals
  Provides numerous groundable points for wrist straps, mats, carts, tools, and other items
• NEW Quick Connect Terminal for #8 Rings
  Provides a verified ground point for mats, carts, tools, and other items. Connect with the 09842 Multi-Ground Hub.
• Visual and Audible Indicators
  Displays pass/fail conditions for the outlet for grounding purposes of an ESD Control Plan
• NIST Calibrated
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco Asia products, see Calibration.
• Made in the United States of America
  This item is made and stocked in Chino, CA

“The grounding system must be verified periodically at the frequency established in a user defined ESD Control Program Plan.” [Grounding ANSI/ESD S6.1 section 6.2 Verification Frequency]

“All of the grounding conductors from each of the ESD technical elements (excluding level 2 technical elements) used within an EPA shall be terminated at the same electrically equivalent point. The common point ground may be a terminal strip, bus bar or any other convenient configuration that is, within itself, electrically continuous to no greater than 1 ohm measured from point to point with an ohmmeter”. [Grounding ANSI/ESD S6.1 section 5.2.1 Common Point Ground]