Desco logo - click to return to home page

Manufacturer of ESD Static Control Products

Full Catalog > Continuous Monitors > Workstation Monitors > Dual-Wire Continuous Monitors > Dual-Wire Dual Operator Monitor >

19662-DUAL-WIRE DUAL OPERATOR MONITOR

19662-DUAL-WIRE DUAL OPERATOR MONITOR 19662-DUAL-WIRE DUAL OPERATOR MONITOR 19662-DUAL-WIRE DUAL OPERATOR MONITOR 19662-DUAL-WIRE DUAL OPERATOR MONITOR 19662-DUAL-WIRE DUAL OPERATOR MONITOR 19662-DUAL-WIRE DUAL OPERATOR MONITOR 19662-DUAL-WIRE DUAL OPERATOR MONITOR              

19662 - Dual-Wire Dual Operator Monitor

List Price
1 $348.31


This item is built-to-order. A minimum order of 1 is required if there is no stock currently on hand. Lead times are typically 6-8 weeks.

Stock: 0

Stock Location: YACHIMATA CITY, CHIBA

Country Of Origin: Not Found

Sold Per: EA

Gross Weight2: 1.25 kg

2The weight listed is gross product weight including standard packaging, actual shipment weight may vary.

Quantity:


 



Bookmark and Share
  • NEW enclosure design features access slot to operator test limit and test voltage switches and includes embedded hardware for 19663 Mounting Brackets accessory
  • Dual Station Continuous Monitor for 2 Operators and 2 Worksurfaces
    Continuously monitors the path-to-ground integrity of two operators and two ESD worksurfaces independently. Use with dual-wire wrist straps.
  • Dual Conductor Resistance Technology1
    Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor
  • Adjustable 5V or 8V Operator Test Voltage
    Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • Adjustable (10 or 35 megohms) Operator Upper Test Limits2
    Sets alarm limits to ESD susceptible device limits or other requirements
  • <1 Second Alarm Response Time
    Identifies failures and intermittencies that inferior technologies miss
  • Replaceable Operator Remote Terminals
    Replaces operator remotes should their jacks become worn (operator 1 remoteoperator 2 remote)
  • Calibration Verification
    Use the 50524 Dual-Wire Monitor Limit Comparator to check the test limits without removing from workstations
  • NIST Calibrated with Certificate Included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
  • 100-240VAC Power Adapter with Interchangeable Plugs
    Works with standard electrical systems in North America, United Kingdom, Japan, Asia, and Europe
  • Made in the United States of America
    This item is made and stocked in Chino, CA

 

  1. Designed in accordance with ESD TR20.20-2016 Section: 18.3.2 Dual Conductor Resistance Continuous Monitors.
  2. The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106ohms with product qualification testing per ANSI/ESD S1.1. The test range of the operator monitored circuits is 1.91 megohms to 10 megohms or 35 megohms. The 35 megohms high test limit is the default/factory set range. The 10 megohm range should be used when operators are handling more sensitive ESD susceptible devices or to detect failures in the wrist strap before reaching the 35 megohms limit.
Show more details...
Hide details...
  • TB-3083 - Dual-Wire Dual Operator Monitor Installation, Operation and Maintenance