Desco logo - click to return to home page

Manufacturer of ESD Static Control Products

Full Catalog > Continuous Monitors > Workstation Monitors > Dual-Wire Continuous Monitors > Zero Volt Monitor >


19668-ZERO VOLT MONITOR 19668-ZERO VOLT MONITOR              


List Price
1 $421.65

Stock: 0


Country Of Origin: USA

Sold Per: EA

Gross Weight2: 1.56 kg

2The weight listed is gross product weight including standard packaging, actual shipment weight may vary.



Bookmark and Share
  • Dual Station Continuous Monitor for 2 Operators And 2 Worksurfaces
    Continuously monitors the path-to-ground integrity of two operators and two ESD worksurfaces independently
  • Zero Volt Monitor Technology
    Places dual test signals onto each of the dual-wire wrist strap’s conductors to negate finger-tip voltage and the risk of electrical overstress (EOS) for the handling of sensitive components
  • Operator Charge Detection
    Alarms should voltage greater than ±1.25 V become induced onto the operator
  • <500 Millisecond Alarm Response Time
    Identifies failures and intermittencies that inferior technologies miss
  • Adjustable Worksurface Test Limits
    Configures the monitor to be paired with multiple types of worksurface materials
  • Replaceable Operator Remote Kits with 3.5 Mono Jacks and Auxiliary Banana Jacks
    Replaces the black and white operator remotes should their jacks become worn
  • Compatibility with Dual-Wire Wrist Straps
    Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • Calibration Verification
    Use the Desco 50524 Dual-Wire Monitor Limit Comparator to check the test limits of Zero Volt Monitors without removing them from their workstations
  • NIST Calibrated with Certificate Included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
  • 100-240VAC Power Adapter with North American Plug
    Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
  • Made in the United States of America
    This item is made and stocked in Chino, CA

*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.


Show more details...
Hide details...
  • TB-3078 - Zero Volt Monitor - Installation, Operation, and Maintenance