Desco logo - click to return to home page

Manufacturer of ESD Static Control Products

Full Catalog > Continuous Monitors > Workstation Monitors > Single-Wire Continuous Monitors > Continuous Mini Monitor >

19342-MINI MONITOR, WITH UNIVERSAL POWER ADAPTER

19342-MINI MONITOR, WITH UNIVERSAL POWER ADAPTER 19342-MINI MONITOR, WITH UNIVERSAL POWER ADAPTER 19342-MINI MONITOR, WITH UNIVERSAL POWER ADAPTER 19342-MINI MONITOR, WITH UNIVERSAL POWER ADAPTER 19342-MINI MONITOR, WITH UNIVERSAL POWER ADAPTER              

19342 - MINI MONITOR, WITH UNIVERSAL POWER ADAPTER

List Price
1 $215.54

3 In Stock.

Stock Location: YACHIMATA CITY, CHIBA

Country Of Origin: USA

Sold Per: EA

Gross Weight2: 0.34 kg

2The weight listed is gross product weight including standard packaging, actual shipment weight may vary.

Quantity:


 



Bookmark and Share
  • Single Workstation Continuous Monitor
    Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
  • NEW Illuminated Enclosure¹
    Makes the status of the operator and worksurface highly visible to the operator and supervisor
  • IMPROVED Continuous Visual and Audible Alarms
    Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs; illuminates blue to indicate standby mode
  • NEW Park Delay Timer and ParkSnap™
    Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
  • NEW Mat Monitor Switch
    Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
  • NEW Audible Alarm Adjustment
    Sets the audible alarm volume from loud to louder
  • Wave Distortion Technology
    Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground² and the presence of its 1 megohm safety resistor
  • Threaded Worksurface Grounding and Mounting
    Grounds and monitors the worksurface with no additional wire
  • Single-Wire Impedance Design
    Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • 1.2 Volt Operator Test Voltage
    Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • <50 Millisecond Alarm Response Time
    Identifies failures and intermittencies that inferior technologies miss
  • Desco 19344 Ring Magnets
    Mounts the monitor in areas without a worksurface
  • Calibration Verification
    Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
  • NIST Calibrated – Original Calibration Certificate can be Downloaded Here
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
  • 100-240VAC Safety Certified Power Adapter with IEC C14 Style Inlet
    Connects to a power cord with an IEC C13 connector. See item 50546.
  • Made in the United States of America
    This item is made and stocked in Chino, CA

 

¹Patent pending

 

²The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.

Show more details...
Hide details...
  • TB-3098 - Mini Monitor: Installation, Operation and Maintenance

Mini Monitor Installation Tutorial

Mini Monitor Product Tutorial