• Dual Station Continuous Monitor for 2 Operators and 2 Work Surfaces
  Continuously monitors the integrity of both operators and ESD workstations, eliminating the need for periodic testing and recording. Ideal for adjacent workstations for assembly, test, packaging, or other applications.
• NEW Improved Banana Jack

     Creates a more consistent connection and helps to prevent accidental disconnects with operator’s wrist strap.

• Wave Distortion Technology Provides Real-Time Continuous Monitoring for Operator Path to Ground and Presence Of 1 Meg Resistor
  True continuous monitoring (versus pulsed or intermittent) of wrist strap functionality and operator safety according to accepted industry standards.
• Ready To Use Unit Includes Control Unit and Two Satellite Remote Monitors.
  Control unit can be mounted at eye level away for work area so that current status is easily monitored and satellite remotes can me mounted in desired locations up to 7 feet from control unit. Each satellite includes a monitored wrist strap ground, parking snap, and unmonitored ground for guest, cart, equipment or other grounding applications.
• Park Snap Feature for Each Operator on Satellite Remote
  Provides means for operator to disconnect wrist strap cord when normally leaving the workstation without audible (false) alarm sounding.
• Full Time Status LEDs and Audible Alarm for Operator and Workstation Monitoring.
  Audible and LED visual alarms activate instantly when a failure occurs, alerting user and supervisor of problem, allowing immediate corrective action
• Miniscule Electrical Current Required to Generate Waveform Monitoring Signal
  Safe to use with sensitive components and no reported case of skin irritation
• Easy to Install Housing with Screws or Adhesive Backed Hook and Loop Strips
  Optional mounting suitable to most machinery and work area, even in hard to reach locations
• Calibration Unit Available For Accurate Performance And Conformity Testing In The Field
• Replacement Satellite Remote Monitors
• NIST Calibrated with Certificate Included
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration

• Made in the United States of America
  
  Note: Continuous Monitors pay for themselves improving quality, productivity, eliminating wrist strap daily testing and test result logging. Per ESD-S1.1 paragraph 6.1.3 Frequency of Functional Testing "The wrist strap system should be tested daily to ensure proper electrical value. Daily testing may be omitted if constant monitoring is used." Per ESD Handbook TR 20.20 paragraph 5.3.2.4.4 "Typical test programs recommend that wrist straps that are used daily should be tested daily. However, if the products that are being produced are of such value that knowledge of a continuous, reliable ground is needed, and then continuous monitoring should be considered or even required."
  
  Note: Work surface must have a conductive layer such as Dual Layer Rubber or Dissipative 3-Layer Vinyl or Micastat® Dissipative Laminate with conductive buried layers. Desco Continuous Monitors are not recommended for use with homogeneous matting.
  
  Use with Desco mats Statfree T2™, Statfree B2™, and Statfree UC™