• Homogeneous Vinyl with Diamond Plated Surface Pattern Surface
  Consistent electrical and slip resistant properties
• Laminated Foam Rubber Anti-Fatigue Base
  Foam rubber base will not break down or absorb moisture like vinyl products
• Resistance to Ground 10E3 - 10E5 Ohms*
  Designed to meet requirements of ANSI/ESD S20.20** where operators use a foot grounding system for primary grounding purposes. Excellent choice for use around automated SMT and wave machines, shipping areas, and other environments where operators stand for long periods of time
• Diamond Plate Pattern
  Provides better traction especially where moisture may accumulate
• Highly Visible Yellow Border with Beveled Edges and Radius Corners
  Allows carts and chairs to roll over without damage
• Works in Conjunction with Conductive ESD Tiles or Paint
  Maintains consist path to ground when on operator is on properly grounded conductive floor mat
• Grounding Hardware Included
  Individual mats should be grounded. Linked mats should be grounded every 10-12 feet.
• Made In the United States of America
  
  *Conductive (<10E6) as defined by ANSI/ESD S7.1, Floor Materials – Characterization of Materials.
  
  **Designed to exceed requirements of ANSI/ESD S20.20 for primary ground of mobile operators, Flooring / Footwear System – Method 1, <3.5 X 10E7 Operator Resistance to ground, tested per ANSI/ESD STM 97.1, Floor Materials and Footwear – Resistance Measurement in Combination with a Person, when used with proper ESD foot grounders.

“ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.” (ANSI/ESD S20.20 section 6.2.2.2 Personnel Grounding Guidance)

“The use of floor materials to control personnel or equipment generated static has a number of benefits. Floor materials tend to be passive. Employees who work in areas protected with floor materials simply need to wear and test the appropriate footwear. They do not need to implement any additional actions themselves to assure that the floor material is functioning properly.” (ESD Handbook TR20.20 section 5.3.4.4)