• Durable rubber material, dissipative on one side and conductive on the other
  Versatile and long-lasting product; use as a dissipative worksurface table mat. Bottom conductive layer provides reliable path to ground, compatible for use with continuous monitors
• Dissipative worksurface - 1 x 10⁶ to < 1 x 10⁹ ohms Rtt
  Slows charge removal; meets minimum recommended worksurface requirements of ANSI/ESD S20.20 and recommendations of ESD 4.1
• Lightly embossed surface
  Easier to clean than vinyl mats; excellent coefficient friction for handling electronic products
• 100% Premium Nitrile Butadiene Rubber
  Excellent value providing long-lasting, good-looking life; consistent electrical properties; will never delaminate; can also be taped or glued down
• Superior heat, chemical and wear resistance
  Excellent choice in soldering and other challenging manufacturing environments. Click Here for Chemical Resistance Chart
• Top of mat kits laser engraved with ESD protective symbol & manufacturer
  Identifies ESD protective product for control & auditing purposes
• Non-humidity dependence
  Provides consistent electrical performance regardless of ambient humidity
• Lead-free RoHS compliant
• Superior limited lifetime warranty
  Electricals guaranteed for the life of the mat
• Made in Japan from globally sourced materials

Rtt: 1 x 10⁶ to < 1 x 10⁹ (Dissipative Side) and <1 x 10⁴ (Conductive Side) ohms per ESD S4.1
Rtg: 1 x 10⁶ to < 1 x 10⁹ (Dissipative Side) and < 1 x 10⁴ (Conductive Side) ohms per ESD S4.1
Thickness: 0.060" (1.5mm)

Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10⁹ ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10⁶ ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).

Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. Desco Asia to approve exchange for similar items.