• Adjustable, non-slip material
  May be fitted to almost all people
• Elastic Band
  User comfort
• Made in the United States of America

What the ESD Association says about testing wrist straps:

Per ESD Handbook TR20.20 section 5.3.9.1  Wrist Strap Checkers - “Wrist strap checkers have historically been the primary tool for testing the operation of the wrist strap system including, the wristband, grounding cord and most importantly, the electrical integrity of the contact between the wristband and the wearer. Wrist strap checkers measure the resistance of the entire system.”

NOTE: All bands have a 4mm snap stud. Complete wrist strap kits include an alligator clip. Wrist strap kits include an alligator clip for occasions when a grounded banana jack is not available. However, best industry practice is that ESD Ground Connections should be firm fitting connecting devices such as metallic crimps, snaps and banana plugs to be connected to designated ground points. Use of alligator clips is not recommended. (Ref: JEDEC Standard No. 625-A)

ANSI/ESD S20.20 Paragraph 6.2.2.1 Personnel Grounding Requirement "All personnel shall be bonded or electrically connected to ground or contrived ground when handling ESD sensitive items. When personnel are seated at ESD protective workstations, they shall be connected to the common point via a wrist strap system."

Reliable Path-to-Ground: Are You Wasting the Money Spent on ESD Control? How Many Accidental Disconnects Occur a Day at Your Plant Putting Your Products at Risk? Read the Evaluation Engineering Magazine Article, "Solving the Wristband Snap Release Problem"
*Reproduced with Permission,
EE-Evaluation Engineering, June, 2001