Desco logo - click to return to home page

Manufacturer of ESD Static Control Products

Full Catalog > Test Equipment > Wrist Strap and Footwear Testers > Combo Tester > Combo Tester X3 >


19275-COMBO TESTER X3, TESTER ONLY              

19275 - Combo Tester X3, Tester Only

Stock: 0


Sold Per: EA

Estimated Shipping Weight: 0.35 kg



Bookmark and Share
  • NEW Compatibility with ESD Glove Test Fixture
  • Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
  • Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms, Footwear limits 750 kilohms to 35 megohms*
  • Determines that operator’s personal grounding device** is functioning correctly
  • Simultaneous Testing in Up to 3 Seconds
  • Reduces time spent testing personal grounding devices used in ESD Control Plans
  • Solid State Touch Test Button with No Moving Parts
  • Maintains accuracy of tests and extends the lifetime of the tester
  • 30 Volt Test Signal
  • Provides accurate tests that are not humidity dependent
  • Relay for Use with Automatic Doors Or Other Locking Systems
  • Controls access to ESD Protected Areas
  • Calibration Unit Available for Accurate Performance And Conformity Testing In The Field
    See Desco Item 50424
  • NIST Calibrated
  • Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration
  • Made in the United States of America

* Default test ranges listed. Additional test settings are noted in the tech bulletin TB-3034.

** The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.

Show more details...
Hide details...
  • TB-3080 - Combo Tester X3 - Installation, Operation and Maintenance