Questions And Answers

To Attach:

1. Strip release paper from pressure sensitive adhesive.

2. Insert the non-adhesive end of the heel grounder inside the shoe so that the black dot is in the
     center of the heel area, facing upwards.

3. Wrap the tape snugly around the outside of the shoe so that the adhesive area adheres to the
    underside of the heel of the shoe.

4. Step firmly onto pressure-sensitive adhesive and tear off excess material at serration.

5. Check for proper ground connection with the Combination Wrist Strap/Footwear Tester.

6. One heel grounder is to be used on each foot.